The Fundamentals of Assessment Validation: How to Validate Assessments
The Fundamentals of Assessment Validation: How to Validate Assessments
Blog Article
Registration brings RTOs many duties like annual declarations, AVETMISS reporting, and marketing compliance, yet validation often proves to be the most feared.
Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.
Simply put, validation confirms which aspects of an RTO's assessment process are right and identifies where improvements are needed. A clear understanding of its main components makes it less intimidating.
The SRTOs 2015 Clause 1.8 specifies that RTOs need to ensure compliance of their assessment systems, including RPL, with training package requirements, following the Principles of Assessment and Rules of Evidence.
We must adhere to the standards by conducting two types of validation.
The first validation type ensures your RTO's assessments comply with the training package requirements in your scope.
The next validation ensures that assessments are conducted per the principles of assessment and rules of evidence.
Therefore, validation is conducted both before and after the assessment. This article emphasizes the first type: assessment tool validation.
The Two Types of Assessment Validation Explained
Comprehending Assessment Validation
As mentioned earlier and in one of our previous blog posts, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, also known as pre-assessment validation or verification, pertains to the first part of the clause, focusing on ensuring all unit requirements are met and that all workbooks are fully compliant.
Post-assessment validation, by contrast, focuses on implementation, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.
This discussion will center around assessment tool validation.
How Assessment Tool Validation is Conducted
With a clear understanding of the two types of validation, let’s focus on assessment tool validation.
When Should You Conduct Assessment Tool Validation?
The goal of assessment tool validation is to make sure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
This implies that any time new learning resources are obtained, assessment tool validation must be done before student use.
You don’t need to wait until your next 5-year validation schedule. Immediately validate new resources to ensure they’re ready for student use.
However, this isn't the only instance to conduct this type of validation. Perform assessment tool validation when you:
- resources get updated
- you add new training products on scope
- course is reviewed against training product updates
- identifying your learning resources as a risk during your risk assessment
ASQA applies a risk-based regulation approach, expecting RTOs to do regular risk assessments. Hence, student complaints about learning resources are a good reason for assessment tool validation.
What Training Products Need Validation?
Bear in mind, this validation aims to ensure compliance of all learning resources before use. All RTOs are required to validate all unit resources.
Necessary Resources for Assessment Tool Validation
Academic Resources
To validate your assessment tools, you will need the complete set of your learning resources:
Mapping tool – the first document you should look at. It highlights which assessment items meet unit requirements, accelerating validation.
Learner/student workbook – assess its appropriateness as an assessment tool. Confirm clear instructions and adequate answer fields. This is a common problem.
Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item are provided. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – such as checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are suitable for the assessment task and address unit requirements.
Validation Panel
Clause 1.11 describes the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs often require all trainers and assessors to be present, occasionally including industry experts.
Your validation panel must, as a group, possess:
Current vocational competencies and relevant industry skills for the unit being validated
Current knowledge and skills in vocational teaching and learning
Any one of the following training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or the equivalent successor
Validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool helps in both the validation process and documentation. It facilitates seeing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It serves as documentation that you have validated your resources prior to student use.
ASQA does not specify a recommended or required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools in their entirety to ensure they meet the principles of assessment.
Principles of Assessment Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While templates of this kind simplify validation, they can introduce judgment errors due to a lack of space for comments on each assessment item.
It is highly recommended to use a more detailed template for inspecting each unit requirement and the assessment items that map to them. Below is an example:
Element Performance Criteria Assessment Directions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Inspect?
As stated in our blog post Common Problems In Assessment Tools, you must ensure your assessment tools allow trainers to adhere to assessment principles and evidence rules.
Fundamental Principles of Assessment
Fairness – Is equal opportunity and access guaranteed for everyone in the assessment process?
Flexibility – Does the assessment provide multiple options to show competence according to various needs and preferences?
Validity – Does the assessment evaluate what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment produce consistent results every time, regardless of who conducts the training? Will different assessors make the same decision on skill competence?
Fundamental Rules of Evidence
Validity – Is the evidence demonstrating that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to confirm the learner has the required skills and knowledge?
Authenticity – Does the assessment tool ensure that the work belongs to the candidate?
Currency – Do the assessment tools reflect current units of competency and modern industry practices?
Although these are regularly covered in VET professional development and nationally recognised training, numerous tools still struggle to meet these requirements.
To avoid employing learning resources that fail to meet all unit requirements, be sure to follow these guidelines:
Lead by Example
Observe the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Complete each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:
nappy change
bottle preparation, feeding babies from bottles, and cleaning equipment
solid foods preparation and feeding babies
respond properly to infant signs and cues
prepare and settle babies for rest
monitor and promote physical exploration and gross motor skills suitable for the age
Having students explain changing nappies for babies under 12 months old doesn’t directly click here address the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.
Plurals Matter!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t meet the requirement.
All Requirements or Not Competent
Mind the lists. In the previous example, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Be Clearer
Every assessment item must include clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are clear and not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What details can be included in a work package?
Answers may include:
Essential resources
Applicable costs
Activity duration
Allocated roles and responsibilities
When an assessment item calls for multiple answers, indicate the number of answers a student needs to provide. This way, your assessment is reliable, and the evidence gathered is valid.
This applies equally to assessment items with double-barrelled questions or questions that require more than one answer at the same time. These can confuse students and assessors, as illustrated in the example below:
Name a hazard and/or environmental concern in the workplace and choose the most effective hazard control hierarchy.
Answers might include, but are not limited to:
Weather conditions – isolating the work area, engineering, personal protective equipment
Work area and ground conditions – eliminating hazards, isolating, engineering
People – isolation, engineering controls, administrative controls
Structural hazards – substitution, isolation, engineering
Chemical hazards – isolation, engineering controls, administrative controls
Equipment or machinery – isolation, engineering controls, administrative controls
Avoiding double-barrelled questions makes it simpler for students to answer and for assessors to accurately judge student competence.
Considering these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” However, with these guarantees, you must wait for an audit before they help rectify noncompliance. This affects your compliance history, so it's better to take a safe and compliant approach.